--- title: "Manage the authenticator" slug: "hwrd-fx2-um-manage-the-authenticator" updated: 2026-10-27T15:15:24Z published: 2026-10-27T15:15:24Z canonical: "docs.onespan.com/hwrd-fx2-um-manage-the-authenticator" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.onespan.com/llms.txt > Use this file to discover all available pages before exploring further. # Manage the authenticator Use the Settings menu to manage device settings and features, including language, PIN, Bluetooth, fingerprints, and time. ## Change the display language To set the authenticator display language 1. Turn on the authenticator. 2. Tap Settings. 3. Tap Language. 4. Select your preferred language. ## Manage the Bluetooth settings ### Pair a device To pair a device 1. Turn on the authenticator. 2. Tap Settings > Bluetooth. 3. Tap Connect device. In pairing mode, the authenticator is visible to any nearby device over Bluetooth as “DIGIPASS FX2”. 4. On your host device, start Bluetooth pairing. 5. When prompted, enter the pairing code on your authenticator. The Digipass FX2 authenticator can store up to 4 paired devices. If the limit is reached, the oldest device is replaced. ### Remove a paired device To remove a paired device 1. Turn on your authenticator. 2. Tap Settings > Bluetooth > Manage devices. 3. Select the paired device that you want to remove. 4. Tap YES to confirm. > Also remove the pairing on the host device before reconnecting. ### Disable Bluetooth Bluetooth is enabled by default. > If you disable Bluetooth while you are connected to the authenticator via Bluetooth, the connection will be closed. To disable Bluetooth 1. Connect your authenticator. 2. Tap Settings > Bluetooth. 3. Tap Turn off. ## Change the PIN To change the PIN 1. Turn on the authenticator. 2. Tap Settings. 3. Tap Change PIN. 4. Enter the old PIN and tap OK. 5. Enter the new PIN and tap OK. 6. Confirm the new PIN and tap OK. ## Manage fingerprints ### Enroll fingerprints To enroll a fingerprint 1. Turn on the authenticator. 2. Tap Settings. 3. Tap Fingerprint > Add Fingerprint. 4. Enter your PIN and tap OK. 5. Follow the instructions on the authenticator display to enroll your fingerprint. A confirmation message is displayed once the fingerprint enrollment completed successfully. > If enrollment fails, slightly adjust the angle or the position of your finger ### Delete enrolled fingerprints To delete enrolled fingerprints 1. Turn on the authenticator. 2. Tap Settings. 3. Tap Fingerprint > Manage Fingerprint. 4. Tap the Recycle bin icon. 5. Select the fingerprint that you want to delete from the list. 6. Tap Yes to confirm. ## Time synchronization The authenticator loses the time and date if the battery has been completely discharged. In that case, it is necessary to synchronize the time again to use time-based features, such as TOTP or time-based Digipass OTPs. > Recharge your authenticator regularly to avoid losing the time due to battery discharge. To resynchronize the authenticator time 1. Turn on the authenticator. 2. Tap Settings. 3. Tap Set time. 4. Follow the on-screen instructions. ## Reset the Digipass FX2 authenticator In some situations it is necessary to restore the factory settings of the Digipass FX2 authenticator, for example, if the PIN is locked. > A factory reset deletes all personal information that is stored on the authenticator: > > - PIN > - All fingerprint templates > - All credentials > - All accounts > - All Bluetooth pairings To reset the authenticator 1. Turn on the authenticator. 2. Tap Settings. 3. Tap Factory reset. 4. Tap Yes to confirm the reset. > The option to reset the authenticator is only available when the PIN is locked. You can also reset it via USB using a client application, such as Windows Security Key Management.