--- title: "Configuring OneSpan Authentication Server Appliance for wireless authentication" slug: "oa-ag-configure-oa-for-wireless-authentication-3-29" updated: 2026-10-05T14:15:02Z published: 2026-10-05T14:15:02Z canonical: "docs.onespan.com/oa-ag-configure-oa-for-wireless-authentication-3-29" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.onespan.com/llms.txt > Use this file to discover all available pages before exploring further. # Configuring OneSpan Authentication Server Appliance for wireless authentication To configure OneSpan Authentication Server Appliance for wireless networking 1. Log on to the OneSpan Authentication Server Administration Web Interface (see [Accessing OneSpan Authentication Server Appliance Configuration Tool and OneSpan Authentication Server Administration Web Interface](/sec/docs/oa-ag-accessing-configuration-tool-and-administration-web-interface-3-29)). 2. Create a copy or a child policy of the IDENTIKEY Local Authentication policy. 3. Select POLICIES > List and select the respective policy created. 4. Switch to the RADIUS tab and click EDIT. 5. Set Supported protocols to Secure and click SAVE. 6. Create a new client component (via CLIENTS > Register) with the following settings: - Client Type: RADIUS Client - Location: IP address of the wireless access point - Policy ID: If this is the only wireless access point used, link to the policy just created. If this will NOT be the only wireless access point used, see [Configuring multiple wireless access points](/sec/docs/oa-ag-configuring-multiple-wireless-access-points-3-29). - Protocol ID: RADIUS - Shared Secret: The shared secret used by the wireless access point (see [Configuring wireless access points](/sec/docs/oa-ag-configuring-wireless-access-points-3-29)).