--- title: "Manual settings in the Configuration Tool" slug: "oa-ag-manual-settings-in-the-configuration-tool-3-28" updated: 2026-10-05T14:10:20Z published: 2026-10-05T14:10:20Z canonical: "docs.onespan.com/oa-ag-manual-settings-in-the-configuration-tool-3-28" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.onespan.com/llms.txt > Use this file to discover all available pages before exploring further. # Manual settings in the Configuration Tool After first-time installation has been completed, manual configuration via the OneSpan Authentication Server Appliance Configuration Tool is possible. This allows you to do the following: - Modify settings that were entered during the Configuration Wizard. - Configure additional settings, such as for Virtual Mobile Authenticator (Message Delivery Component). For more information about manual configuration without the wizard, see [Installation and configuration](/sec/docs/oa-pg-installation-and-configuration-3-28) and [Configuration Tool fields.](/sec/docs/oa-aref-configuration-tool-fields-3-28) To adjust the settings manually, log on to the Configuration Tool (see [Accessing OneSpan Authentication Server Appliance Configuration Tool and OneSpan Authentication Server Administration Web Interface](/sec/docs/oa-ag-accessing-configuration-tool-and-administration-web-interface-3-28)). Navigate to Configuration Tool > Settings, select the relevant item from the Settings menu, and adjust the settings as required. ## Enabling services OneSpan Authentication Server Appliance includes the following services: - Authentication - Provisioning - Signatures These services are enabled by default, but can be separately disabled or enabled. To enable or disable services 1. Launch the OneSpan Authentication Server Appliance Configuration Tool and enter your credentials (see [Accessing OneSpan Authentication Server Appliance Configuration Tool and OneSpan Authentication Server Administration Web Interface](/sec/docs/oa-ag-accessing-configuration-tool-and-administration-web-interface-3-28)). 2. Select Authentication Server > Scenarios. 3. Enable or disable services by selection the corresponding checkboxes.