--- title: "Manual settings in the Configuration Tool" slug: "oa-ag-manual-settings-in-the-configuration-tool-3-29" updated: 2026-10-05T14:12:35Z published: 2026-10-05T14:12:35Z canonical: "docs.onespan.com/oa-ag-manual-settings-in-the-configuration-tool-3-29" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.onespan.com/llms.txt > Use this file to discover all available pages before exploring further. # Manual settings in the Configuration Tool After first-time installation has been completed, manual configuration via the OneSpan Authentication Server Appliance Configuration Tool is possible. This allows you to do the following: - Modify settings that were entered during the Configuration Wizard. - Configure additional settings, such as for Virtual Mobile Authenticator (Message Delivery Component). For more information about manual configuration without the wizard, see [Installation and configuration](/sec/docs/oa-pg-installation-and-configuration-3-29) and [Configuration Tool fields](/sec/docs/oa-aref-configuration-tool-fields-3-29). To adjust the settings manually, log on to the **Configuration Tool** (see [Accessing OneSpan Authentication Server Appliance Configuration Tool and OneSpan Authentication Server Administration Web Interface](/sec/docs/oa-ag-accessing-configuration-tool-and-administration-web-interface-3-29)). Navigate to Configuration Tool > Settings, select the relevant item from the Settings menu, and adjust the settings as required. ## Enabling services OneSpan Authentication Server Appliance includes the following services: - Authentication - Provisioning - Signatures These services are enabled by default, but can be separately disabled or enabled. To enable or disable services 1. Launch the **OneSpan Authentication Server Appliance Configuration Tool** and enter your credentials (see [Accessing OneSpan Authentication Server Appliance Configuration Tool and OneSpan Authentication Server Administration Web Interface](/sec/docs/oa-ag-accessing-configuration-tool-and-administration-web-interface-3-29)). 2. Select Authentication Server > Scenarios. 3. Enable or disable services by selection the corresponding checkboxes.