--- title: "Typical RADIUS setup" slug: "oa-ag-typical-radius-setup-3-29" updated: 2026-10-05T14:15:02Z published: 2026-10-05T14:15:02Z canonical: "docs.onespan.com/oa-ag-typical-radius-setup-3-29" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.onespan.com/llms.txt > Use this file to discover all available pages before exploring further. # Typical RADIUS setup OneSpan Authentication Server Appliance can be used in a RADIUS environment in a number of ways. In the following topics, the configuration of a typical RADIUS setup is explained. ![Standalone OneSpan Authentication Server Appliance in a RADIUS environment](https://cdn.document360.io/038f59a7-abd0-4c14-9de7-3434d28b49fd/Images/Documentation/Env.RADIUS_Standalone_OA.png?sv=2026-02-06&spr=https&st=2026-11-16T16%3A49%3A23Z&se=2026-11-16T17%3A49%3A23Z&sr=b&sp=r&sig=hIcu4mIXOq1X5b7aVl5hzVfHWlilsaruSBxfLTWAtMo%3D) Figure: Standalone OneSpan Authentication Server Appliance in a RADIUS environment In a typical standalone environment (see [Figure: Standalone OneSpan Authentication Server Appliance in a RADIUS environment](/sec/docs/oa-ag-typical-radius-setup-3-29#Fig_StandaloneOAInRADIUSEnvironment)), a RADIUS client is configured for authenticator authentication only towards OneSpan Authentication Server Appliance. A RADIUS client can be one of the following: - Dial-up network access server (NAS) - Firewall or VPN appliance - Wireless access point - Any other device that uses the RADIUS protocol for user authentication. The OneSpan Authentication Server Appliance Authentication service must be enabled before a RADIUS setup can be configured. For more information about enabling the Authentication service, see [Manual settings in the Configuration Tool](/sec/docs/oa-ag-manual-settings-in-the-configuration-tool-3-29). ## Setting up a RADIUS client Configure your RADIUS client to send requests to the OneSpan Authentication Server Appliance IP address, using the default RADIUS port: - For authentication requests, the default RADIUS port is 1812 (UDP). - For accounting requests, the default RADIUS port is 1813 (UDP). The port can be changed on OneSpan Authentication Server Appliance if necessary. Navigate to OneSpan Authentication Server > RADIUS Communicator. To create a client component record (RADIUS client) 1. Log on to the OneSpan Authentication Server Administration Web Interface (see [Accessing OneSpan Authentication Server Appliance Configuration Tool and OneSpan Authentication Server Administration Web Interface](/sec/docs/oa-ag-accessing-configuration-tool-and-administration-web-interface-3-29)). 2. Select CLIENTS > Register. 3. Enter the required settings for the new client component: - Client Type: RADIUS Client - Location: The IP address of the RADIUS client. - Policy ID: The policy you want to use for this client component, e.g., Identikey Local Authentication. - Protocol ID: RADIUS - Shared Secret: The shared secret used by the RADIUS client. 4. Click CREATE. ### Optionally modifying policies and settings using the Administration Web Interface The illustrated example configures authenticator authentication only in the assigned policy. Other authentication settings (for example, local or back-end authentication) and authentication options (for example, grace period, assignment methods) can also be configured. For more information about the possible policy settings, see [Policies](/sec/docs/oa-pg-policies-3-29). For a reference of the pre-loaded default policies, see [Pre-defined policies](/sec/docs/oa-aref-pre-defined-policies-3-29). For more information about different policy options with examples using the RADIUS Client Simulator, see [Test scenarios](/sec/docs/oa-ag-test-scenarios-3-29).