The information in this section does not apply to OneSpan Authentication Server Virtual Appliance!
The safety and environmental information provides details important both for the safe use of OneSpan Authentication Server Appliance and to help maintain the device in a safe environment to keep it fully operational.
Read all of the safety and environmental information before starting to install your OneSpan Authentication Server Appliance!
Electrical safety
Use the exact type of power cord required:
Only use a power cord with safety certifications.
Only use a power cord that is compliant with the AC voltage requirements in your region.
Plug the power cord into a socket that is properly grounded, before turning on the power.
Turn off the OneSpan Authentication Server Appliance device, before you disconnect the power supply.
Only use a network cable with a maximum length of 3.0 meters to conform to certification restrictions.
Personal, environment, and appliance safety
To avoid back injuries. When lifting the OneSpan Authentication Server Appliance device, avoid injuries to your back by using your leg muscles. Keep your back straight and bend your knees when lifting the device.
To protect the environment. Producing the OneSpan Authentication Server Appliance device involves the extraction and use of natural resources. The product may contain substances that are hazardous for human health and the environment. To reduce the risk of any hazardous substances being released into the environment and to reduce the depletion of natural resources, we encourage you to use appropriate recycling systems. Such systems reuse or recycle most end-of-life materials in a safe way. The 'crossed-bin symbol' invites you to use such systems.
Further information about collection, reuse, and recycling is available from your local or regional refuse administration center.
For more information about OneSpan Authentication Server Appliance and the environment, contact your supplier.
To avoid dropping the OneSpan Authentication Server Appliance. Always hold the appliance firmly by its main casing. Do not lift the device by the silver colored 'D' shapes at the front of the appliance. These are the chassis handles and are only intended to slide the OneSpan Authentication Server Appliance device in and out of the chassis rails.
Temperature, power, and humidity
We recommend to install the OneSpan Authentication Server Appliance device in a server room with air conditioning and an uninterrupted power supply (UPS) system. If the equipment is built into a server cupboard, make sure that there is sufficient ventilation.
The environmental requirements are as follows:
Operating temperature range: 10° to 35° C (50° to 95° F)
Storage temperature range: –40° to +70° C (–40° to +158° F)
Humidity range: 8% to 90% non-condensing
Storage humidity range: 5% to 95% non-condensing
Power supply:
2x500 W high-efficiency (94+%) power supply w/ PMBus (9000 series)
For detailed product specifications, refer to the OneSpan Authentication Server Appliance datasheet, available at www.onespan.com/resources/authentication-server-appliance/datasheet.
Dimensions
The dimensions of OneSpan Authentication Server Appliance AG-9XXX are as follows:
Height: 1.7″ (43 mm)
Width: 17.2″ (437 mm)
Depth: 25.6″ (650 mm)