--- title: "Configuring OneSpan Authentication Server for wireless authentication" slug: "oas-ag-configure-oas-for-wireless-authentication-3-29" updated: 2026-01-14T13:04:49Z published: 2026-01-14T17:06:32Z canonical: "docs.onespan.com/oas-ag-configure-oas-for-wireless-authentication-3-29" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.onespan.com/llms.txt > Use this file to discover all available pages before exploring further. # Configuring OneSpan Authentication Server for wireless authentication To configure OneSpan Authentication Server for wireless networking 1. Log on to the Administration Web Interface. 2. Create a copy or a child policy of the IDENTIKEY Local Authentication policy. 3. Select POLICIES > List and select the respective policy created. 4. Switch to the RADIUS tab and click EDIT. 5. Set Supported protocols to Secure and click SAVE. 6. Create a new client component (via CLIENTS > Register) with the following settings: - Client Type: RADIUS Client - Location: IP address of the wireless access point - Policy ID: If this is the only wireless access point used, link to the policy just created. If this will NOT be the only wireless access point used, see [Multiple wireless access points](/sec/docs/oas-ag-configuring-multiple-wireless-access-points-3-29). - Protocol ID: RADIUS - Shared Secret: The shared secret used by the wireless access point (see [Configuring wireless access points](/sec/docs/oas-ag-configuring-wireless-access-points-3-29)).