---
title: "Configuring OneSpan Authentication Server for wireless authentication"
slug: "oas-ag-configuring-onespan-authentication-server-for-wireless-authentication-3-28"
updated: 2025-07-04T10:04:19Z
published: 2025-07-07T13:24:13Z
canonical: "docs.onespan.com/oas-ag-configuring-onespan-authentication-server-for-wireless-authentication-3-28"
---

> ## Documentation Index
> Fetch the complete documentation index at: https://docs.onespan.com/llms.txt
> Use this file to discover all available pages before exploring further.

# Configuring OneSpan Authentication Server for wireless authentication

To configure OneSpan Authentication Server for wireless networking

1. Log on to the Administration Web Interface.
2. Create a copy or a child policy of the IDENTIKEY Local Authentication policy.
3. Select POLICIES > List and select the respective policy created.
4. Switch to the RADIUS tab and click EDIT.
5. Set Supported protocols to Secure and click SAVE.
6. Create a new client component (via CLIENTS > Register) with the following settings:
  - Client Type: RADIUS Client
  - Location: IP address of the wireless access point
  - Policy ID: If this is the only wireless access point used, link to the policy just created. If this will NOT be the only wireless access point used, see [Multiple wireless access points](/sec/docs/oas-ag-configuring-multiple-wireless-access-points-3-28).
  - Protocol ID: RADIUS
  - Shared Secret: The shared secret used by the wireless access point (see [Configuring wireless access points](/sec/docs/oas-ag-configuring-wireless-access-points-3-28)).