--- title: "Filters" slug: "oas-was-csh-ux-system-server-configuration-system-monitoring-filters-3-28" updated: 2025-07-04T10:06:15Z published: 2025-07-07T16:41:00Z canonical: "docs.onespan.com/oas-was-csh-ux-system-server-configuration-system-monitoring-filters-3-28" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.onespan.com/llms.txt > Use this file to discover all available pages before exploring further. # Filters You must have at least one target configured before you can add a filter (see [Targets](/sec/docs/oas-was-csh-ux-system-server-configuration-system-monitoring-targets-3-28)). | Field name | Description | | --- | --- | | Name | A free form name to identify this filter. | | Target | A target defined on the Targets tab. | | Filter condition | A list of filter conditions (see [Table: Server Configuration – System Monitoring (Filter conditions)](/sec/docs/oas-was-csh-ux-system-server-configuration-system-monitoring-filters-3-28#Tab_SystemMonitoringFilterConditions)). | | Audit Message Types | The audit message type to be monitored. | The Filter condition section of each filter allows you to define which strings to monitor in the Field for each defined audit message types. Adding filter conditions will further narrow the audit messages that are monitored. | Field name | Description | | --- | --- | | Field | Select a field from the drop-down list. | | Condition | Select a condition from the drop-down list. | | Value | Enter a value. This field does not support wildcards such as asterisks (*). |