| Available information | Meaning |
|---|---|
| Token model | The Digipass type, for example, Digipass 300, Digipass GO 3 etc. For more information, refer to Digipass type. |
| Usage count | The number of successful authentications since the last reset operation. |
| Last time used | Date and time of the last successful authentication. |
| Last time shift | Shift between the host and the Digipass clock of the last authentication, indicated in seconds. |
| Error count | Error counter value. |
| Codeword | Codeword value. |
| Triple DES | Indicates if 3DES is used for the OTP generation. |
| Maximum input fields | The maximum number of challenges or data fields. |
| Response length | Length of the response. |
| Response type | Type of the response (decimal or hexadecimal). |
| Response checksum | Indicates whether the response contains a checksum. |
| Time step | Value of the time step used. |
| Available property | Get | Set | Meaning |
|---|---|---|---|
| Token status | ✓ | Enables or disables the primary and/or backup authenticator and sets the virtual mode if needed. | |
Is primary token enabled? | ✓ | Indicates whether the primary authenticator is enabled. | |
Is virtual token supported? | ✓ | Indicates whether the virtual authenticator is supported. | |
Is virtual token enabled? | ✓ | Indicates whether the virtual authenticator is enabled. | |
| Virtual token type | ✓ | The type of virtual authenticator, i.e., PRIMARY or BACKUP. | |
| Virtual token grace period | ✓ | ✓ | Gets or sets the date when the virtual authenticator expires. |
| Virtual token remaining use | ✓ | ✓ | Gets or sets the number of remaining virtual authenticator uses, allowed number of virtual authentications. |
Is static PIN supported? | ✓ | Indicates whether the authenticator application supports the server static PIN feature. | |
| PIN minimum length | ✓ | ✓ | Sets or gets the minimum length authorized for a server static PIN. |
| PIN length | ✓ | Current length of the server static PIN. | |
Is PIN change mode on? | ✓ | Indicates whether the user can change their server static PIN. | |
Is PIN change forced? | ✓ | ✓ | Sets or indicates whether the server static PIN has to be changed at the next logon attempt. |
Is PIN feature enabled? | ✓ | ✓ | Sets or indicated whether the server static PIN feature is enabled. |
| Token model | ✓ | The type of Digipass authenticator. | |
| Use count | ✓ | The number of successful authentications. | |
| Last time used | ✓ | ✓ | Gets or sets the date and time of the last successful authentication. |
| Last time shift | ✓ | ✓ | Gets or sets the shift between the host and the Digipass clock in seconds. |
Is time-based algorithm? | ✓ | Indicates whether die authenticator application has a time-based algorithm. | |
Is event-based algorithm? | ✓ | Indicates whether the authenticator application has an event-based algorithm. | |
Is unlock supported? | ✓ | Indicates whether the authenticator application supports the unlock feature. | |
| Last response type | ✓ | The last valid response type, i.e., PRIMARY or BACKUP. | |
| Error count | ✓ | ✓ | Gets or sets error count, can only be set to 0. |
| Event value | ✓ | ✓ | For event-based algorithms, the current event value stored in the authenticator application BLOB. Indicates the greatest event value received for a valid verification, not necessarily of the latest valid verification performed (for non-sequential signature presentation). |
| Last event value | ✓ | For event-based algorithms, event value of the last valid verification (used for non-sequential signature presentation). | |
Is synchronization window used? | ✓ | Indicates whether the initial synchronization time window will be used to perform the next validation for the authenticator application. | |
| Codeword | ✓ | Application codeword. The codeword provides information on the algorithm used by the authenticator application. | |
| Authentication mode | ✓ | RO, CR, SG, MM or UL. | |
| OCRA suite | ✓ | Indicates the OCRA Suite string (for OCRA applications only). | |
Is derivation supported? | ✓ | Indicates whether Digipass data derivation is supported by the authenticator application. | |
Maximum DTF number | ✓ | Maximum number of data fields supported. | |
DTF1 to DTF8 min length | ✓ | Minimum length of the data field (for DTF1 to DTF8). | |
DTF1 to DTF8 max length | ✓ | Maximum length of the data field (for DTF1 to DTF8). | |
DTF1 to DTF8 check digit | ✓ | Indicates whether the data field use a check digit (for DTF1 to DTF8). | |
| Response length | ✓ | Length of the response. | |
| Response format | ✓ | Type of the response (decimal or hexadecimal) | |
| Response check digit | ✓ | Indicates whether the response contains a checksum | |
| Time step | ✓ | Value of the timestep used | |
Is Triple DES used? | ✓ | Indicates if the application uses the 3DES algorithm. | |
Is secure channel message signature supported? | ✓ | Indicates whether the secure channel message signature validation is supported by the authenticator application. | |
Is offline data block generation supported? | ✓ | Indicates whether the offline data block generation (for offline authentication with the OneSpan Authentication Suite Server SDK Offline Module) is supported by the authenticator application. | |
Encryption algorithm | ✓ | Algorithm used to encrypt the respective authenticator BLOB data (AES, 3DES). |