First steps
Turn the authenticator on/off
In standalone mode (without USB connection):
To turn on the authenticator, press the Power button for one second.
To turn off the authenticator, press and hold the Power button.
The authenticator will automatically turn off after 60 seconds of inactivity.
In USB-connected mode:
To turn on the authenticator, plug in the USB cable.
To turn off the authenticator, unplug the USB cable, then press and hold the Power button.
First-time use
When you use the Digipass FX2 authenticator for the first time, connect it via USB. You cannot turn on the authenticator by pressing the Power button until it has been connected via USB at least once.
Connect your authenticator
You can connect your authenticator via Bluetooth LE, USB, or NFC.
Initial authenticator setup
When you use the Digipass FX2 authenticator for the first time, an installation wizard guides help you through the initial setup.
To set up the Digipass FX2 authenticator
Turn on the authenticator.
Select a language.
Enter a PIN and tap OK.
Confirm the PIN and tap OK.
(OPTIONAL) Enroll a fingerprint by following the on-screen instructions.
Fingerprint enrollment is optional. If you skip it, use the PIN for authentication. If at least one fingerprint is enrolled, fingerprint verification is used by default.
You will receive a confirmation message once the initial setup has been successfully completed.
You can add and manage fingerprints at any time later via the Settings > Fingerprint menu.
Use the Digipass FX2 authenticator
How you use the Digipass FX2 authenticator depends on your application provider and the features enabled (for example, user authentication or transaction signing).
Follow the instructions provided by your application provider to:
Sign in
Authorize transactions