Each wireless access point (WAP) must be configured with the according settings (see Table: Required wireless access point settings).
| Setting | Value |
|---|---|
| Encryption protocol | WAP Enterprise or WAP2 Enterprise |
| Encryption algorithm | AES |
| RADIUS protocol | One of the supported EAP or PEAP protocols:
|
| RADIUS server | Enter the IP address and the RADIUS port (default 1812) for OneSpan Authentication Server. |
| Shared secret | A passphrase used to authenticate the RADIUS client and OneSpan Authentication Server to each other. |
If your wireless access point does not support wireless session settings from the configured RADIUS server, change the default reAuthPeriod configuration setting to the required period before a fast reconnect should be attempted. One hour is the recommended period.
Configure the supplicant to request authentication details for every full authentication whenever possible. If this is not configured, each automatic full reconnection attempt (not fast reconnect) will cause a failed authentication.